Terms - Siemens AT 18 Operating Instructions Manual

Rev.01 Issue 09/05

4 Terms

Initial speed = decreased speed used in closing and opening operations after power is
turned on until normal operation is recognized.
Creep speed = decreased speed in the proximity of the "Open" position of the lift door
(creep distance). The driving parameter names are "slow start speed open" and "slow
end speed open".
Cam speed = decreased speed in the proximity of the "Close" position of the lift door
(cam distance). The driving parameter names are "slow start speed close" and "slow end
speed close".
Creep distance = door operating area in the proximity of the "Open" position. The
driving parameter names are "slow start distance open" and "slow end distance open".
Cam distance = door operating area in the proximity of the "Close" position. The driving
parameter names are "slow start distance close" and "slow end distance close".
6 Operating instructions AT18 SEDM