Removing Iscsi Initiators - D-Link DSN-1100 X Stack User Manual

Advanced Setting
Maximum Data Segment Length Received
Primary Authentication Method
Secondary Authentication Method
Is Read Only?

3.5 Removing iSCSI Initiators

To remove an iSCSI initiator:
1. In the Volume View, click an iSCSI initiator.
2. Perform one of the following steps to remove the selected iSCSI initiator:
On the Initiators menu, click Remove Initiator.
–
In the Initiator Actions panel, click Remove Initiator.
–
Press the right mouse button, then from the shortcut menu, click Remove
–
Initiator.
xStack Storage Management Center Software User's Guide
Description
The longest data segment, in bytes, that the volume can receive. Choices are:
8192

16384

32768 (default)

Primary authentication method used by the volume. Choices are:
CHAP

None (default)

Secondary authentication method used by the volume. Choices are:
CHAP (default)

None

Choices are:
Do not set as Read Only (default)

Set as Read Only

Clicking the Sort by Initiator button displays iSCSI initiators without iSCSI
sessions below initiators with active sessions in the Main View.
Do not remove an iSCSI initiator when there is disk input/output (I/O)
activity occurring between the initiator and the array.
59