Operating Power; Nonvolatile Memory/Memory Retention - Motorola 38C V100 Service Manual

General Operation

Operating Power

E

Nonvolatile Memory/Memory Retention

6
The transceiver board and controller circuit boards obtain power from a 3.6V
rechargable Lithium Ion battery pack which provides initial power to the commu-
nicator and charges the internal power source.
There is a danger of explosion if the Lithium Ion battery pack is replaced incorrectly.
Replace only with the same type of battery or equivalent as recommended by the
battery manufacturer. Dispose of used batteries according to the manufacturer's
instructions.
All messages, device status, and setup information stored in FLASH memory are
maintained after removing the primary battery from the device.
To ensure proper memory retention, turn OFF the communicator before removing
the battery. Immediately replace the old battery with a fresh battery.
If the battery is removed while receiving a message, the message will be lost.
MOTOROLA CONFIDENTIAL - PROPRIETARY
November 20, 2000
Product Family 38C
6881036B20