Panasonic DBS 824 Manual page 398

FF7
International Calling For TRS Types 3-6
Software Version CPC-S and CPC-M, Version 1 0 and higher
Address FF7 l# I# (0 or l)#
Description
Use this program to set system-wide restrictions for the dialing of
international calls on trunks assigned TRS types 3-6
If the DBS 824 system is programmed to use the new AJANP dialing plan
determines whether the system will check the Country Code Table for any
restrictions on the dialed number
If the DBS 824 system is programmed to use the old dialing plan (FF7 l#
whether international calling is allowed or restricted system-wide
This program only applies to those trunks that are assigned TRS types 3-6
International calls are always restricted for TRS types 1 and 2 -- and always
allowed for TRS type 7
Programming
I
New Dialing Plan (NANP)
Related Programming
Dialing Plan Switch FF'7 l# 16# (0 or l)#
Country Code Table FF7 l# 19# (Table)++ (Code)+!
Override Toll Restrictions with SSD Numbers FFl 2# l# 4## (SSD)#
System Installation Area Code FFl 2# l# 17# (0 or l)#
Issued 3/l /95
FF7 l# I# (0 or l)#
Old Dialing Plan
O=System will check Country
l=System will not check Country Code
DBS 824-l O-400
international Calling For TRS Types 3-6
calls are restricted
for restrictions
Table for restrictions (all international
calls are allowed)
Code Table
7-5