Call Service Features - Asus Analog Telephone Adapter AX-112 User Manual

4.2 Call service features

AX-112 has a set of pre-defined service dial code for using the functions such
as conditional forwarding, call return, and PSTN mode switch. Refer to the
table for the functions' description and usage.
FUNCTION
Conditional Call Forwarding
Call Forward On
Call Forward Off
Do Not Disturb On
Do Not Disturb Off
Call Transfer
Call Return
Speed Dial
The relative setting fields on the web can not be left blank. You have to predefine
all the call service command in the web GUI in advance, or use the default setting,
before using service functions.
ASUS recommends that you change the service code values only if you have meet
conflict with the setting of your service provider.
AX-112 Analog Telephone Adapter
Chapter 4 - Operation
PRESS
KEY
(Default)
*70# Enter the forwarding phone number right
after *70#, you will hear 3 short tone as
confirm.
*72# Same as above
#72# 3 short tone will be played as confirm
*74# Same as above. Will reject all incoming
call.
#74# 3 short tone will be played as confirm
*98# Enter the destination phone number
right after *98#, and hang up phone after
hearing 3 short tone will transfer the call
(blind transfer).
*69# Auto redial the previous one missed
incoming call.
*68n There are 8 speed dial number entries
on web GUI, you have to predefine
the phone number in each field for
this function. The value 'n' indicates
the relative number of speed dial field
number from 1 to 8.
USAGE
2