Honeywell Prestige THX9321 Operating Manual page 18

Operating Manual
Remote setback (commercial use)
During occupied periods, an occupancy sensor tells the thermostat to go to
STANDBY (setback settings) when no one is in the room. If someone is in the room,
then it follows the settings of the occupied period. The occupancy sensor is ignored
during unoccupied periods.
If the thermostat is setup for non-programmable, the sensor tells the thermostat to go
to STANDBY settings when no one is in the room. If someone is in the room, then it
follows the settings set by the user.
Depending on how your thermostat was installed, there may be a time delay of up
to 30 minutes before it switches from occupied settings to the standby settings. This
allows the room to stay comfortable if the room is unoccupied for a short period of
time.
69-2493EFS—05
16