Operations
S.M.A.R.T. information
The unit provides a function that diagnoses the lifetime based on the amount of use of built-in units or the
characteristic values.
The unit diagnoses the built-in fan in the system, controller storage device, changer unit, drive system, and
magazines, then generates a warning if these are approaching the end of lifetime.
≥ To check the status, select "Monitor" "S.M.A.R.T." on the control panel or the Web interface. ( 51, 84)
≥ It is recommended to replace the unit or magazine for which the lifetime is almost at an end as soon as possible.
≥ S.M.A.R.T. information is not perfect and the accuracy is not guaranteed. Even though S.M.A.R.T. diagnosed a
unit or magazine as normal, suddenly it may fail.
Initializing and Saving/Restoring the configuration settings
You can save, restore, or initialize the setting items except for the "Change Password" and "Date/Time" in the
"Config"/"Configure" menu of the control panel or Web interface from "Config"/"Configure" "Save/Restore". ( 55,
89)
≥ For the default value of each setting, refer to each description page.
≥ Keep the "Change Password" because it cannot be saved, restored, and initialized.
The password can be changed from the menu below.
` Control panel: "Config" "System" "Change Password" ( 53)
` Web interface: "Configure" "Change Password" ( 86)
Please contact your support service provider if you forget the password.
≥ "Date/Time" depends on the restored or initialized "Time Zone", "DST", "12h/24h" or "Date Format".
Various Functions
105