Video Menu; Audio Menu - Panasonic SC-PT760 Operating Instructions Manual

• "VIDEO"
menu
TV ASPECT
e 4'3PAN&SCAN: Regular aspect TV (4:3)
~
..
Choose the setting to suit your TV and
The sides of the widescreen picture are cut off so it fills the screen (unless
preference.
prohibited by the disc).
e 4:3LETIERBOX: Regular aspect TV (4:3)
tiJ
Widescreen picture is shown in the letterbox style.
.,;;-l;~·fi""
;?>"'~._._-.-----
e 4:3Z00M: Regular aspect TV (4:3)
The picture zooms in and out.
• 16:9NORMAL: Widescreen TV (16:9)
Laterally stretches image.
e16:9SHRINK: Widescreen TV (16:9)
Images appear at the center of the screen.
e16:9Z00M: Widescreen TV (16:9)
Expands to 4:3 aspect ratio.
TV TYPE eSTANDARD
eCRT eLCD
Select to suit the type of TV.
e PROJECTION ePLASMA
TIME DELAY eO ms/AUTO e20ms
e40ms e60 ms eSOms e100 ms
When connected with a Plasma display,
When using VIERA Link "HDAVI Control" with "HDAVI Control 3" compatible TV (~ 26), select "0 ms/AUTO".
adjust if you notice the audio is out of
Audio and video will automatically be set in sync. (This works only when "DVD/CD" is selected as the source.)
sync with the video.
STILL MODE eAUIQ
Specify the type of picture shown when
e FIELD>': The picture is not blurred, but picture quality is lower.
paused.
e FRAME >': Overall quality is high, but the picture may appear blurred.
BLACK LEVEL
eLiGHTER
Change the black level of the picture.
eDARKER
VIDEO OUT (UP) elNTERLACE
Select "PROGRESSIVE" only if
e PROGRESSIVE: A message screen will appear. Follow the on-screen instructions.
connecting to a progressive output
compatible TV.
• "AUDIO"
menu
DOLBY DIGITAL
'*5
eBITSTREAM
Select to suit the type of equipment you connected to the HDMI AV OUT
ePCM terminal.
DTS*s
eBITSTREAM
ePCM
Select "BITSTREAM" when the equipment can decode the bitstream (digital
form of 5.1 channel data). Otherwise, select "PCM".
(If the bitstream is output to the equipment without a decoder, high levels of
noise can be output and may damage your speakers and hearing.)
DYNAMIC RANGE eON: Adjusts for clarity even when the volume is low. Convenient for late night viewing. (Only works with
Dolby Digital)
eQEE
SPEAKER SETTINGS eSETIINGS:
Make settings for your speakers.
e C DELAY:
oms,
1ms, 2ms, 3ms, 4ms, 5ms
Select the delay time for your center speaker
(~
25, Selecting the delay time of the speakers).
e SUSR DELAY:
oms,
5ms, 10ms, 15ms
Select the delay time for your surround speakers
(~25,
Selecting the delay time of the speakers).
eTEST TONE: SETIING
Use the test tone for speaker level adjustments
(~
29, Adjusting the speaker level).
e CENTER, SURROUND RIGHT, SURROUND LEFT: -6 dB to +6 dB (Factory preset: QJ:!6)
>, Refer to "Frame still and field still" (~ 37, Glossary).
>5 When audio is output from HDMI AV OUT terminal, and the connected equipment does not support the item selected, the actual output will depend
on the performance of this connected equipment.
(Continued on next page)