Advertisement
How to use
0
Switch action
To start the tool, simply pull the trigger.
Release
the trigger to stop.
For continuous operation without having
to keep your finger on the trigger, just
pull the trigger and then push in the lock
button with your thumb. To stop the
tool from lock position, just pull the
trigger again and release
it.
0
Mounting belt
With the tool unplugged and the lever
pulled out all the way, slip the belt over
the rollers with the arrow direction on
the belt the same as that of tool revolu-
tion (or belt life i s shortened).
0
Belt adjustment
Flip sander over on
i t s
back and use the
adjustment knob to obtain equal tension
of
belt over the front and back rollers.
Then plug in sander and switch
it
on,
using the adjustment knob to center the
belt
as it
runs over the rollers.
Failure to adjust belt properly over rollers
can result in frayed belt edges.
I
Lock button
I
4
Advertisement
