Sony SmartBand SWR10 Manual

SmartBand SWR10
Log your day. Log your life.
Life-logging accessory with motion tracking,
vibration notifications and music remote
Key Features
• Accelerometer to track your walking, running and sleeping
• Notifications: device out-of-range, SMS, calls, smart alarm and more
• Waterproof IP58 rated at 1.5 metres depth for up to 30 minutes in fresh water
• Easy one-touch pairing and connecting with NFC
Aluminum
Fastener
Comfortable
silicone band

Getting Started

1. Enable NFC (Near Field Communications) on your smartphone.
2. With screen unlocked, tap the smartphone to the SmartBand, install the SmartConnect app when prompted.
(Smart Connect is pre-installed on Sony smartphones.)
3. Tap smartphone to the SmartBand, the SmartConnect application will launch.
4. On Non-Sony Xperia devices follow on-screen instructions to install SmartBand and Lifelog apps.
Xperia Device
Step 1 Step 2
Charge core for 30 min Press button on core
to turn on and insert core
into SmartBand
Step 3 Step 4
Ensure Smartphone Smart Connect will
screen is unlocked and prompt you to install
NFC is turned on. Tap core SmartBand SWR10
to phone NFC sensor and Lifelog apps
www.sonymobile.com
Micro USB
charging
• On/Off
• Life Bookmark
• Day/Night mode
• Music remote
(press key + tap band)
Notification LED's
Non-Xperia Device
Step 1 Step 2
Charge core Press button on core
for 30 min to turn on and insert
core into SmartBand and NFC is turned on.
Step 3 Step 4
Ensure Smartphone Phones will prompt Smart Connect will
screen is unlocked you to install Smart prompt you to install
Connect. After SmartBand SWR10
Tap core to phone installation Tap Core and Lifelog apps
NFC sensor to phone again.
Step 5