Ipv6 Name-Server - Dell Z9500 Command Reference Manual

Version
9.2(1.0)
9.0.0.0
8.3.19.0
8.3.7.0
8.4.2.1
8.4.1.0

ipv6 name-server

Enter up to six IPv6 addresses of name servers. The order you enter the addresses determines the order
of their use.
Z9500
Syntax
ipv6 name-server ipv6-address [ipv6-address2... ipv6-address6]
To remove a name server, use the no ipv6 name—server ipv6–address
command.
Parameters
ipv6-address
ipv6-address2...
ipv6-address6
Defaults none
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
1020
Description
Introduced on the Z9500.
Introduced on the Z9000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
Introduced on the E-Series TeraScale.
Enter the IPv6 address (X:X:X:X::X) of the name server to be
used.
Note: The :: notation specifics successive hexadecimal fields
of zeros.
(OPTIONAL) Enter up to five more IPv6 addresses, in the
x:x:x:x::x format, of name servers to be used. Separate the
IPv6 addresses with a space.
Description
Introduced on the Z9500.
IPv6 Basics