Preparation
About the connection (Continued)
Connection of the power cord (provided)
Once you have connected the equipment, connect the projector power cord.
1
HDMI
2
RS-232-C
C
R/
P
R
C
B/
P
B
Y
3D
REMOTE
TRIGGER
SYNCHRO
PC
CONTROL
1
Power Cord
(Supplied)
2
Be carful to avoid re and electric shocks
●
As the amount of electrical energy for this unit is large, please connect it directly into
the wall outlet.
●
When you are not using the equipment, please unplug the power cord.
CAUTION
●
Connect it only with the provided power cord.
●
Do not use voltage other than the indicated power voltage.
●
Do not damage, break or modify the power cord. Moreover, the power cord will be
damaged if you place it under heavy objects, heat or pull it.
●
Do not unplug with wet hands.
34
1 Connect the power cord supplied with the
STANDBY/ON
INPUT
unit power input terminal
OK
2 Connect to the power outlet
MENU
BACK
http://www.pureglare.com.au