Socket lga775 pentium 4 ati rs400 mini itx industrial motherboard (60 pages)
Summary of Contents for IBT Technologies IB530
Page 1
IB530 AMD Geode LX 3.5-inch Disk Size SBC USER’S MANUAL Version 1.0...
Page 2
PS/2 is a trademark of International Business Machines Corporation. AMD, AMD Geode, and combinations thereof, are trademarks of Advanced Micro Devices, Inc. Microsoft Windows is a registered trademark of Microsoft Corporation. All other product names or trademarks are properties of their respective owners. IB530 User’s Manual...
INTRODUCTION Introduction Product Description The IB530 3.5-inch disk size SBC incorporates the AMD Geode LX processor with speeds of 433MHz (LX700), 500MHz (LX800) or 600MHz (LX900). It comes with one DDR SO-DIMM socket that has a capacity of 1GB system memory. The board supports two 10/100Mbps Ethernet, using Realtek RTL8100C controllers.
INTRODUCTION Checklist Your IB530 package should include the items listed below. • The IB530 AMD Geode LX 3.5-inch Disk Size SBC • This User’s Manual • 1 CD containing chipset drivers and flash memory utility • Heatsink for AMD Geode LX processor •...
PC-104 w/ 4 mounting holes Expansion Slot (Non DMA ISA ONLY,Not support PCI) Supports 4 In / 4 Out Digital I/O +12V DC-in Power Software programmable, supports 1~255 sec. system reset Watchdog Timer RoHS Compliant 145 x 102mm Board Size IB530 User’s Manual...
INSTALLATIONS Installations This section provides information on how to use the jumpers and connectors on the IB530 in order to set up a workable system. The topics covered are: Installing the Memory....Error! Bookmark not defined. Setting the Jumpers .....Error! Bookmark not defined.
INSTALLATIONS Installing the Memory The IB530 board supports one SODIMM DDR memory socket for a maximum total memory. The memory module capacities supported are 128MB, 256MB, 512MB and 1GB. Installing and Removing Memory Modules To install the DDR modules, locate the memory slot on the board and perform the following steps: 1.
INSTALLATIONS Setting the Jumpers Jumpers are used on IB530 to select various settings and features according to your needs and applications. Contact your supplier if you have doubts about the best configuration for your needs. The following lists the connectors on IB530 and their respective functions.
INSTALLATIONS Connectors on IB530 The connectors on IB530 allows you to connect external devices such as keyboard, floppy disk drives, hard disk drives, printers, etc. The following table lists the connectors on IB530 and their respective functions. Connector Locations on IB530............. 11 CN1, CN2: RJ45 Connector ............
Signal Name Green Blue N.C. DDCDA HSYNC VSYNC DDCCLK CN4: Compact Flash Card Socket CN5: FDD Connector Signal Name Pin # Pin # Signal Name INDEX DRV_SEL DSK_CH MOTOR DINST STEP WDATA WGATE TRACK WPROT RDATA SIDE IB530 User’s Manual...
Signal Name Ground USB0- USB1+ USB0+ USB1- Ground J10: PS/2 Keyboard and Mouse Connector J10 is a 6-pin header for the external keyboard connector Pin # Signal Name Keyboard Data Keyboard Clock Mouse Data Mouse Clock Ground IB530 User’s Manual...
ACK, acknowledge Ground Busy Ground Paper empty Ground Select Protect pin J14: Power DC-In Pin # Signal Name DC In (12V only) Ground J16: Digital 4-in 4-out Connector Signal Name Signal Name Ground Out3 Out1 Out2 Out0 IB530 User’s Manual...
<PgUp> and <PgDn> keys to change entries, <F1> for help and <Esc> to quit. When you enter the Setup utility, the Main Menu screen will appear on the screen. The Main Menu allows you to select from various setup functions and exit choices. IB530 User’s Manual...
Page 25
These defaults have been carefully chosen by both Award and your system manufacturer to provide the absolute maximum performance and reliability. Changing the defaults could cause the system to become unstable and crash in some cases. IB530 User’s Manual...
Sun to Sat Month : 1 to 12 Date : 1 to 31 Year : 1999 to 2099 To set the date, highlight the “Date” field and use the PageUp/ PageDown or +/- keys to set the current time. IB530 User’s Manual...
Page 27
These fields identify the types of floppy disk drive A or drive B that has been installed in the computer. The available specifications are: 360KB 1.2MB 720KB 1.44MB 2.88MB 5.25 in. 5.25 in. 3.5 in. 3.5 in. 3.5 in. IB530 User’s Manual...
Page 28
The system boot will not be halted for a disk error; it will stop for all other errors. All, But Disk/Key The system boot will not be halted for a key- board or disk error; it will stop for all others. IB530 User’s Manual...
SCSI, CDROM, HDD-1, HDD-2, HDD-3, ZIP100, USB-FDD, LAN, USB-CDROM, USB-HDD and Disable. Boot Other Device These fields allow the system to search for an OS from other devices other than the ones selected in the First/Second/Third Boot Device. IB530 User’s Manual...
Page 30
Setup. When you select System, the system prompts for the User Password every time you boot up. When you select Setup, the system always boots up and prompts for the Supervisor Password only when the Setup utility is called up. IB530 User’s Manual...
Page 31
OS/2 that depends on certain BIOS calls to access memory. The default setting is Non-OS/2. Small Logo (EPA) Show The EPA logo appears at the right side of the monitor screen when the system is boot up. IB530 User’s Manual...
Memory Hole At 15M-16M In order to improve performance, certain space in memory can be reserved for ISA cards. This memory must be mapped into the memory space below 16 MB. The choices are Enabled and Disabled. IB530 User’s Manual...
33Mb/sec with the Ultra DMA/33 feature. The options are Auto and Disabled. IDE HDD Block Mode This field allows your hard disk controller to use the fast block mode to transfer data to and from your hard disk drive. IB530 User’s Manual...
Page 34
This field determines the UART 2 mode in your computer. The default value is Normal. Other options include IrDA and ASKIR. Parallel Port Mode This field allows you to determine parallel port mode function. Standard Printer Port Enhanced Parallel Port Extended Capabilities Port IB530 User’s Manual...
IRQ Wakeup Events Power Management The options for the power management setting are Disabled, Legacy, ACPI and APM. Suspend Mode When enabled, and after the set time of system inactivity, all devices except the CPU will be shut off. IB530 User’s Manual...
This field allows you to set whether or not MPEG ISA/VESA VGA cards can work with PCI/VGA. When this field is enabled, a PCI/VGA can work with an MPEG ISA/VESA VGA card. When this field is disabled, a PCI/VGA cannot work with an MPEG ISA/VESA card. IB530 User’s Manual...
3.39V 5.13 V VBAT 3.21 V Temperatures/Voltages These fields are the parameters of the hardware monitoring function feature of the motherboard. The values are read-only values as monitored by the system and show the PC health status. IB530 User’s Manual...
Select this option to exit the Setup utility without saving the changes you have made in this session. Typing “Y” will quit the Setup utility without saving the modifications. Typing “N” will return you to Setup utility. IB530 User’s Manual...
The contents of this section include the following: Entertainment Encryption/Decryption Controller Driver ..36 VGA Drivers Installation ............38 Audio Driver Installation ............41 PCI Bridge Driver Installation ........... 44 IB530 User’s Manual...
1. In the Windows operating system, go to the Device Manager. 2. As shown below, click the Entertainment Encryption/Decryption Controller under Other devices. 3. In the following window, click the Driver tab and click OK to continue. IB530 User’s Manual...
Page 41
(Advanced). Click Browse to find the driver’s path in the CD provided - \AMD\AES. Then, click Next to start the drivers installtion. Then click Finish after the wizard has finished installing the software for Geode LX AES Crypto Driver. IB530 User’s Manual...
1. In the Windows operating system, go to the Device Manager. 2. As shown below, click the Video Controller (VGA Compatible under Other devices. 3. In the following window, click the Driver tab and click OK to continue. IB530 User’s Manual...
Page 43
DRIVERS INSTALLATION 4. In the Hardware Update Wizard, select No, not this time and click Next to continue. Then select Install from a list of specific location (Advanced). IB530 User’s Manual...
Page 44
CD provided or enter the path directly - \AMD\Vga\. Then, click Next to start the drivers installtion. Then click Finish after the wizard has finished installing the software for Advanced Micro Devices Win XP Graphics Driver. IB530 User’s Manual...
1. In the Windows operating system, go to the Device Manager. 2. As shown below, click the Multimedia Audio Controller under Other devices. 3. In the following window, click the Driver tab and click OK to continue. IB530 User’s Manual...
Page 46
DRIVERS INSTALLATION 4. In the Hardware Update Wizard, select No, not this time and click Next to continue. Then select Install from a list of specific location (Advanced). IB530 User’s Manual...
Page 47
CD provided or enter the path directly - \AMD\Audio\XPe. Then, click Next to start the drivers installtion. Then click Finish after the wizard has finished installing the software for GeodeLX Audio Driver (WDM). IB530 User’s Manual...
DRIVERS INSTALLATION PCI Bridge Driver Installation 1. In the Windows operating system, go to the Device Manager. 2. As shown below, click Other devices, then Other PCI Bridge Device. IB530 User’s Manual...
Page 49
DRIVERS INSTALLATION 3. In the following window, click the Driver tab and click Update Driver to continue. IB530 User’s Manual...
Page 50
5. In the next screen, check Include this location in the search. Click Browse to find the driver’s path in the CD provided or enter the path directly - \AMD\ITE8888. Then, click Next to start the drivers installation. IB530 User’s Manual...
Serial Port #2 IRQ4 Serial Port #1 IRQ5 For PCI IRQ6 Floppy Disk Controller IRQ7 Parallel Port #1 IRQ8 Real Time Clock IRQ9 For PCI IRQ10 For PCI IRQ11 For PCI IRQ12 PS/2 Mouse IRQ13 Coprocessor IRQ14 Primary IDE IB530 User’s Manual...
;switch to LD8 mov cl, 0F5h call Read_Reg and al, NOT 08h call Write_Reg ;set count mode as second pop ax mov cl, 0F6h call Write_Reg ;set watchdog timer mov al, 01h mov cl, 30h call Write_Reg ;watchdog enabled IB530 User’s Manual...
Page 54
; IN : None ; OUT : None ;[]=============================================== Unlock_Chip Proc Near mov dx, 4Eh mov al, 87h out dx, al out dx, al Unlock_Chip Endp ;[]================================================ ; Name : Lock_Chip ; IN : None ; OUT : None IB530 User’s Manual...
Page 55
: Read_Reg ; IN : CL - register index ; OUT : AL - Value to read ;[]=================================================== Read_Reg Proc Near mov al, cl mov dx, 4Eh out dx, al inc dx al, dx Read_Reg Endp ;[]================================================ IB530 User’s Manual...
Page 56
APPENDIX This page is intentionally left blank. IB530 User’s Manual...