Radial Engineering BigShot MIX Owner's Manual

FEATURES AND FUNCTIONS
INPUT - This 1⁄4" jack connects 9VDC - 2.1mm connection
5
1
from your instrument. jack for standard 9 volt power
adaptors (center tip negative).
SEND - This 1⁄4" jack connects
2
to the input of an effect pedal. POLARITY - This two position
6
switch is used to compensate
RETURN - This 1⁄4" jack
3 for effect pedals that invert
connects to the output of an
their outputs to prevent phase
effect pedal.
cancellation.
LEVEL - This recessed control
4 OUTPUT - This 1⁄4" jack connects
7
sets the mix ratio between the
to your amplifi er.
direct signal and effect pedal.
LOOP - Heavy-duty footswitch
8
with LED status indicator.
5 4 3 2
6
7
8
Radial Engineering Ltd. BigShot MIX User Guide
BIGSHOT MIX SPECIFICATIONS
Audio connections: .................4 x 1⁄4" phone jacks
Input / Output impedance: ......1M Ohms / 1k Ohms
Switching: ...............................Heavy-duty footswitch with LED indicator
Power: ....................................9 Volt DC, center negative barrel plug
Current draw: .........................40mA max current draw with LED on
Size: .......................................3" x 3" x 2"
LIMITED THREE YEAR TRANSFERABLE WARRANTY
Radial Engineering Ltd. ("Radial") warrants this product to be free from defects in
material and workmanship and will remedy any such defects free of charge according
to the terms of this warranty. Radial Engineering will repair or replace at its option any
defective component(s) of this product, excluding the fi nish, the footswitch (footswitch
is warranted for 90 days) and wear and tear from normal use, for a period of three
(3) years from the original date of purchase. In the event that a particular product
is no longer available, Radial Engineering reserves the right to replace the product
with a similar product of equal or greater value. To make a request or claim under
this limited warranty, the product must be returned prepaid in the original shipping
container (or equivalent) to Radial Engineering or to an authorized repair centre and
you must assume the risk of loss or damage. A copy of the original invoice showing
date of purchase and the dealer name must accompany any request for work to be
performed under this limited warranty. This limited warranty shall not apply if the product
has been damaged due to abuse, misuse, misapplication, accident or as a result of
service or modifi cation by any other than an authorized repair centre.
THERE ARE NO EXPRESSED WARRANTIES OTHER THAN THOSE ON THE FACE
HEREOF AND DESCRIBED ABOVE. NO WARRANTIES, WHETHER EXPRESSED
OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
1
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL
EXTEND BEYOND THE RESPECTIVE WARRANTY PERIOD DESCRIBED ABOVE
OF THREE YEARS.
RADIAL ENGINEERING SHALL NOT BE RESPONSIBLE OR LIABLE FOR ANY
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSS ARISING
FROM THE USE OF THIS PRODUCT. THIS WARRANTY GIVES YOU SPECIFIC
LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH MAY VARY
DEPENDING ON WHERE YOU LIVE.
Radial Engineering Ltd.
True to the Music
2.1mm inside dia. (5.5mm O.D.)
BigShot MIX User Guide
True to the Music
BigShot MIX
Owner's Manual
Radial Engineering Ltd.
1638 Kebet Way, Port Coquitlam BC V3C 5W9
Tel: 604-942-1001 Fax: 604-942-1010
email: info@radialeng.com
Radial BigShot MIX users guide v1.0 - Part #: R870 1160 00
Subject to change without notice