GENERAL SYSTEM CONFIGURATION
Figure 1-13 Add Extension screen
Table 1-6
Add Extension Parameters
Parameter
Extension
Authentication User Name
and Password
Display Name
Mailbox Name
Server
Forwarding Unconditional
Number
1-18
An extension will not become active until the extension is programmed in
the IPedge or Strata CIX system and you register a handset to the
extension. For IPedge systems refer to
page
2-1.
1. In the left panel of the Home/Status screen, select Extensions. The
base station opens the Extensions screen and displays the extension
information for Server 1.
2. If you have more than one IPedge or Strata CIX system, click the
name of the server you want to program extensions for.
3. Click on Add Extension, then enter the parameters for this
extension. Refer to
Enter the handset phone number or SIP username as configured on the
IPedge or Strata CIX system.
Enter the name and password you use to register with the selected
IPedge or Strata CIX system. Use a strong password. The password
must have eight characters, include upper case and lower case letters
and at least one digit.
Enter the name of this extension (up to 10 characters). This name is
used for reference on the web interface.
Enter the name of the voice mailbox this extension should use.
Select the IPedge or Strata CIX system this extension is programmed on.
Forward all calls: Enter the number the system should forward calls to.
Select Enable to turn call forwarding on or Disable to leave it off.
(Sheet 1 of 2)
"IPedge CONFIGURATION"
Table
1-6.
Meaning
IP4100 Install Sept., 2013
Program SIP Extensions
on