Operating Your Breville Crazy Snow Ice Shaver - Breville BIS200 Crazy Snow Instructions For Use And Recipe Book

OPERATING YOUR BREVILLE CRAZY SNOW
BEFORE FIRST USE
Remove any packaging material and promotional
labels. Remove the lid housing, ice stirring paddles,
ice collector and ice shaving blade (following the
disassembly instructions) and wash in warm soapy
water. Rinse and dry thoroughly making sure there is
no residual water that can run into the motor body.
With a damp cloth, wipe the ice shaving blade body
and motor body using caution around the blade area,
dry thoroughly.
TO DISASSEMBLE THE CRAZY SNOW
Step 1
Switch off and unplug the cord of the appliance at
the power outlet.
Step 2
Step 3
Remove the Ice collector.
Carefully remove the ice
shaving blade from the
ice shaving blade body by
unscrewing the knob in an
anticlockwise direction.
Take care when handling
the ice shaving blade as it
is very sharp.
Step 4
Step 5
NOT E!!
If the ice shaving blade is not removed as shown
in Step 3, care must be taken to avoid touching
the ice shaving blade located towards the front of
the ice shaving blade body.
Depress the button located
at the back of the ice shaving
blade body then remove
the lid housing by lifting it
upwards away from the ice
shaving blade body.
Remove the ice stirring
paddles from the ice shaving
blade body by unscrewing
the knob in an anticlockwise
direction.