Table of Contents
Advertisement
8. BIOS Settings
BIOS Setup Utility
8.1.
The BIOS setup defines how the system is configured. You need to run this
program the first time you configure this product. You may need to run it again if
you change the configuration.
You need to connect a PC keyboard to the keyboard connector to run the BIOS
setup utility.
Starting the BIOS Setup
8.2.
1. Turn on or reboot this product.
2. Press the DEL key immediately after the product is turned on, or press the
DEL key when the following message is displayed during POST (the Power
on Self-Test).
3. The main menu of the BIOS setup is displayed.
4. If the supervisor password is set, you must enter it here.
When a Problem Occurs
8.3.
If, after making and saving system changes with the Setup utility, you find that
this product no longer boots, start the BIOS setup and execute the following.
BIOS Main Menu
8.4.
When the BIOS Main Menu is displayed, the following items can be selected.
Use the arrow keys to select items and the Enter key to accept and enter the
sub-menu.
Note: The BIOS menu below is from B78 BIOS version B78FV10.BIN. If you
have a different BIOS version, the contents of the menu may different.
Press DEL to enter SETUP.
Load Optimized Defaults
39
Advertisement
Table of Contents
