Yamaha RX-V779 Owner's Manual page 100

Item Function
Adjust the decay time of the rear
Reverb Time
reverberant sound.
Adjusts the delay between the direct
Reverb Delay sound and reverberant sound
generation.
Adjusts the volume of the reverberant
Reverb Level
sound.
The following items are available when you select "2ch Stereo" or "7ch Stereo".
Sound program Item
2ch Stereo Direct
Level
Front / Rear Balance
Left / Right Balance
7ch Stereo
Height Balance
Monaural Mix
• Available items in "7ch Stereo" vary depending on the speaker system being used.
Settings
1.0 s to 5.0 s
Higher to enrich the
reverberant sound and lower
to have clear sound.
0 ms to 250 ms
Higher to enhance the delay
effect, and lower to reduce it.
0% to 100%
Higher to strengthen the
reverberant sound, and lower
to weaken it.
Function Settings
Selects whether to
automatically bypass the
DSP circuit when an Auto, Off
analog audio source is
played back.
Adjusts the entire volume. -5 to 0 to +5
-5 to 0 to +5
Adjusts the front and rear
Higher to enhance the front
volume balance.
side, and lower to enhance
the rear side.
-5 to 0 to +5
Adjusts the left and right
Higher to enhance the right
volume balance. side, and lower to enhance
the left side.
0 to 5 to 10
Higher to enhance the
upside, and lower to
Adjust the height volume
enhance the downside. (The
balance using the
presence speakers do not
presence speakers.
produce sounds when
"Height Balance" is set to
"0".)
Enables/disables
Off, On
monaural sound output.
■
Settings for decoders
The following items are available when you set "Decode Type" of "SURROUND
DECODER" to "bPLIIx Music" or "Neo:6 Music".
Decode Type Item
Panorama
bPLIIx Music
Center Width
Dimension
Neo:6 Music Center Image
100
En
Function Settings
Off, On
Select "On" to wrap front left/right
Adjusts the broadening
channel sounds around the field
effect of the front sound
and generate a spacious sound
field.
field in combination with the
surround sound field.
0 to 3 to 7
Adjusts the broadening
Higher to enhance the broadening
effect of the center
effect, and lower to reduce it
sound field.
(closer to center).
-3 to 0 to +3
Adjusts the difference in
level between the front Higher to strengthen the front
and surround sound sound field and lower to strengthen
fields.
the surround sound field.
0.0 to 0.3 to 1.0
Adjusts the center
Higher to strengthen the center
orientation level
orientation level (less broadening
(broadening effect) of
effect) and lower to weaken (more
the front sound field.
broadening effect).