Handset - Panasonic KX-PRL260B Service Manual

8.1.2.

Handset

Important:
Make sure the address on LCD is correct when entering new data. Otherwise, you may ruin the unit.
1). Press MENU .
2). Select "Settings" using
3). Enter "7", "2", "6", "2", "7", "6", "6", "4".
4). Select "Write EEP" using
5). Enter " ", " ", " ", " " (Address). (*1)
6). Enter " ", " " (New Data). (*1)
7). Press OK , a long confirmation beep
8). Press
Dial keypad
H/S key operation
then press SELECT .
Note: 7262 7664 = PANA SONI
(see letters printed on dial keys)
then press SELECT .
will be heard.
OFF to return to standby mode.
After that, remove and reinsert the batteries. Press the Power button for
about 1 second if the power is not turned on.
【OFF】
【FLASH】
【CALL WAIT】
or
or
27
KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20
H/S LCD
Service Mode
Read EEP
Write EEP
BACK
SELECT
Set Addr.:
Default Data
CLEAR
OK
Set Addr.:
New Data
CLEAR OK
Set Addr.:
_ _ _ _ _ _
BACK