Before You Call - Kenmore 790.3102 Series Use & Care Manual

Table of Contents

Advertisement

Before You Call
Solutions
to Common
Problems
Before you carl for service, review this list. It may save you time and expense. The list includes common occurrences
that are not the result of defective workmanship or materials in this appliance.
OCCURRENCE
POSSIBLE
CAUSE/SOLUTION
Surface burners
do not light
Surface Control knob has not been completely turned to LITE. Push in and turn
the Surface Control knob to LITE until burner ignites and then turn control to
desired flame size.
Surface burner flame burns half
way around
Surface
burner
flame
is orange
Be sure gas supply valve is open.
Burner ports or slots are clogged. With the burner off, use a small-gauge wire or
needle to clean ports or slots.
Power cord is disconnected from outlet (electric ignition models). Be sure cord is
plugged securely into outlet.
Electrical power outage (electric ignition models). Burners can be lit manually. See
Setting Surface Controls
in this Use & Care Guide.
Burner ports or slots are clogged. With the burner off, clean ports and slots with a
small-gauge wire or needle.
Moisture is present after cleaning. To avoid this occurrence dry the burners
thoroughly following instructions under General Care & Cleaning.
Dust particles in main line. Allow the burner to operate a few minutes until flame
turns blue.
Scratches
or abrasion
on cooktop
surface (Ceramic=Glass Cooktop)
In coastal areas, a slightly orange flame is unavoidable due to salt air.
Coarse particles such as salt or sand between cooktop and utensil can cause
scratches. Be sure cooktop surface and bottoms of utensils are clean before
usage. Small scratches do not affect cooking and will become less visible with
time.
Cleaning materials not recommended for ceramic-glass cooktop have been used.
See "Ceramic Glass Cooktop Cleaning & Maintenance" section under General
Care & Cleaning.
Cookware with rough bottom has been used. Use smooth, flat-bottomed
cookware.
Metalmarks
(Ceramic=Glass
Cooktop)
Brown streaks or specks on
ceramic
glass cooktop surface
(Ceramic=Glass Cooktop)
Areas of discoloration
with
metallic
sheen (Ceramic=Glass
Cooktop)
Sliding or scraping of metal utensils on cooktop surface. Do not slide metal
utensils on cooktop surface. Use ceramic-glass cooktop cleaning cream to
remove the marks. See "Ceramic Glass Cooktop Cleaning & Maintenance"
section under General Care & Cleaning.
Boilovers are cooked onto surface. Use razor blade scraper to remove soil. See
"Ceramic Glass Cooktop Cleaning & Maintenance" section under General Care &
Cleaning.
Cleaning materials not recommended for ceramic-glass cooktop have been used.
Use recommended
cleaners and cleaning method. See "Ceramic Glass Cooktop
Cleaning & Maintenance" section under General Care & Cleaning.
Mineral deposits from water and food. Remove using a ceramic-glass cooktop
cleaning cream. To avoid this occurrence use cookware with clean, dry bottoms.
16

Advertisement

Table of Contents
loading

This manual is also suitable for:

790.3050 series

Table of Contents