Controls; Temperature Adjustments; Allowing Cooling Time Before Use; Setting Cooling Temperatures - Frigidaire FFHS2622MSS Use & Care Manual

Allowing Cooling Time Before Use
To ensure safe food storage, allow your refrigerator to operate with the doors closed for at least
8 to 12 hours before placing food inside. During this cooling period, you do not need to adjust
the controls, which are preset at the factory.
Setting Cooling Temperatures
When changing control settings, wait 24 hours for the temperature to stabilize before making
additional changes.
Your refrigerator comes with a state-of-the-art electronic digital control system. The system's
control panel is located at the top of the fresh food compartment.
The two digital displays on the left half of the control panel indicate the current settings or
temperatures of your freezer and fresh food compartments. The models with a two-digit
temperature display are for reference only, and do not display the current accurate compartment
temperature. Should you desire to see what the current accurate temperature is, place a
separate thermometer inside the freezer or fresh food compartment in the desired location.
iiiiiii
iiiiiii
iiiiiii
iiiiiii
iiiiiii
iiiiiii
iiiiiii
Freezer
/Fridge
!!!!!!!
iiiiiii
TEMPERATURE ADJUSTMENT
To adjust the temperature to a higher or lower setting, press the Up (Cold) or Down (Colder)
button closest to the display. The first time you press the button, the display shows current
setting you entered. Each press of the button after that changes the setting by one.
The display shows your new setting momentarily, then changes back to the current temperature.
(Single Digit Display = Features may vary.)