Functional Description - Makita BO5010 Instruction Manual

FUNCTIONAL
DESCRIPTION
1. Switch
ASSEMBLY
6
CAUTION:
• Always be sure that the tool is switched off and
unplugged before adjusting or checking function on the
tool.
Switch action
003285
1
CAUTION:
• Before plugging in the tool, always check to see that the
tool is switched off.
• Switch can be locked in "ON" position for ease of
operator comfort during extended use. Apply caution
when locking tool in "ON" position and maintain firm
grasp on tool.
To start the tool, press the "ON ( I )" side of the switch. To
stop the tool, press the "OFF (O)" side of the switch.
CAUTION:
• Always be sure that the tool is switched off and
unplugged before carrying out any work on the tool.
Installing or removing abrasive disc
For BO5010
003299
CAUTION:
• Always use hook-and-loop system abrasive discs. Never
use pressure-sensitive abrasive discs.
To install the abrasive disc, first remove all dirt or foreign mat-
ter from the pad. Then attach the abrasive disc to the pad,
using the hook-and-loop system of the abrasive disc and the
pad. Be careful to align the holes in the abrasive disc with
those in the pad.
For BO5011
To install the abrasive disc, first remove all dirt or foreign mat-
ter from the pad. Then peel off the backing paper from the
abrasive disc and attach the abrasive disc to the pad. Be
careful to align the holes in the abrasive disc with those in
the pad.