Makita 9207SPB Instruction Manual page 7

1. Grip
1. Lock nut
2. Abrasive disc
3. Rubber pad
1
2
1. Lock nut wrench
2. Wrench
1. Wool bonnet
2. Lock nut
3. Rubber pad
Installing side grip (auxiliary handle)
003445
CAUTION:
• Always be sure that the side grip is installed securely
before operation.
Screw the side grip on the tool securely. The side grip can be
1
installed on either side of the tool, whichever is convenient.
Installing or removing abrasive disc
003455
Mount the rubber pad onto the spindle. Fit the abrasive disc
1
on the rubber pad and screw the lock nut onto the spindle.
2
3
To tighten the lock nut, hold the spindle with the wrench so
003456
that it cannot revolve, then use the lock nut wrench and
securely tighten clockwise.
To remove the disc, follow the installation procedure in
reverse.
Installing or removing the wool bonnet
003461
(optional accessory)
Mount the rubber pad onto the spindle. Screw the lock nut
1
onto the spindle.
2
To tighten the lock nut, hold the spindle with the wrench so
3
that it cannot revolve, then use the lock nut wrench and
securely tighten clockwise.
7