Advertisement
The removable
rack allows you to wash larger items such as stock pots, roasters, and cookie sheets in the
lower level rack.
IMPORTANT: Remove dishes prior to removing the upper rack from the dishwasher.
To remove the rack (push tab rack stop):
1. Roll the rack 1/3to 1/2 of the way out.
2.
Remove each plastic push tab rack stop from the end of each track by pushing inward toward the
rack on the ridged area of the rack stop. The rack stop will snap open and can be easily removed by
pulling straight out. Be sure to support the track while removing rack stops.
3.
Roll the rack all the way out of the track and remove from the dishwasher.
To replace the rack:
Reversethe above steps 1 to 3 to replace the rack into the dishwasher.
The bottom rack is best suited for plates, pans, casseroles, and
utensils. (See recommended
loading patterns shown.)
Load small items in the bottom
rack only if they are secured in
place.
Load plates, soup bowls, etc., between tines.
Load bowls securely between the rows of tines. Ensure that
there is space between dishes so that the spray will reach all
surfaces.
Load heavily soiled items facing the spray.
NOTE: Ensure that detergent dispenser is not blocked
by tall
items such as cookie sheets and cutting boards placed at the
left-hand
front of rack. See "Start Up/Quick
Reference"
section.
Front
10 p/ace/oad
You can fold down one row of tines at the back of the bottom
rack in order to accommodate
larger dishware.
Keep this tine row in the 60 ° position when using the
TurboZone ® (on some models) option.
IMPORTANT: When moving tine row to the flat position, fold
only the tine row toward the front of the dishwasher.
14
Advertisement
