Application Rules - D-Link DIR-602 User Manual

Section 3 – Configuration
Some applications require multiple connections, such as Internet gaming, video conferencing, Internet telephony and
others. These applications have difficulties working through NAT (Network Address Translation). Special Applications
makes some of these applications work with the DIR-602. If you need to run applications that require multiple
connections, specify the port normally associated with an application in the Incoming Ports , select the protocol type
as TCP or UDP, then enter the Outgoing ports associated with the Incoming ports to open them for inbound traffic.
Name: Enter a name for the rule .
Incoming Port Enter the port or a range of ports that
Start/ Incoming you want as your port trigger.
Port End:
Traffic Type: Select TCP, UDP, or BOTH from the
drop-down menu.
Outgoing Port Enter the port or a range of ports that
Start/ Outgoing you want to open.
Port End:
APPLICATION This list shows your current application
RULES LIST: rules.
D-Link DIR-602 User Manual

Application Rules

35