Makita G12010R Instructions For Use Manual page 25

G series
Hide thumbs Also See for G12010R:
Table of Contents

Advertisement

Check the amperage of the receptacles used referring to TABLE 1, and be
sure not to take a current exceeding the specified amperage.
Be sure that the total wattage of all appliances dose not exceed the rated
output of the generator.
Style
WARNING
To take power out from the TWIST
LOCK RECEPTACLE, insert the
plug into the receptacle, and turn
it clockwise to the lock position.
Be sure to ground the generator if
the connected electrical device Is
grounded.
NOTE :
When the no-fuse breaker turns off during operation, the generator is over loaded
or the appliance is defective. Stop the generator immediately, check the appliance
and / or generator for overloading or detect and have repaired as necessary by
Makita dealer or service shop.
Ampere
Receptacle
NEMA
up to 20A
5-20R
NEMA
up to 30A
L5-30R
NEMA
up to 30A
L14-30R
up to 50A
TABLE 1
14
AC plug
Description
GFCI (Ground Fault
NEMA
Circuit Interrupter)
Receptacle, duplex
5-20P
(REC1)
NEMA
Locking Receptacle
L5-30P
(REC2)
NEMA
Locking Receptacle
L14-30P
(REC3)
Locking Receptacle
(REC4)
TWIST

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents