Table of Contents
Advertisement
Section 3 - Installation
Power and Device Selection
Step 8 - Connect the power adapter connector to the power
receptacle on the back of the ShareCenter. Then, power on the
ShareCenter by pressing the power button located in the front panel.
Click Next to continue.
Step 9 - With the power on, press the Next button on the device and
check and make sure the IP address of your ShareCenter matches
what you see on the screen.
Note: Allow 1-2 minutes for the DNS-320LW to be recognized.
Click Next to continue.
D-Link ShareCenter DNS-320LW User Manual
21
Advertisement
Table of Contents
