TABLE OF CONTENTS
1.
GENERAL
Location of controls ........................................................ 3
Resetting the unit ............................................................ 4
Detaching the front panel ................................................ 4
Setting the clock .............................................................. 4
Labelling the rotary commander ..................................... 4
Using the rotary commander .......................................... 4
Adjusting the sound characteristics ................................ 5
Attenuating the sound ..................................................... 5
Changing the sound and display settings ....................... 5
Installation ....................................................................... 6
Connections ..................................................................... 7
2.
......................................................... 12
3.
4.
5.
Test Mode ........................................................................ 18
Tuner Section .................................................................. 19
6.
6-9. Schematic Diagram - Main Board (2/4) - ..................... 39
6-10. Schematic Diagram - Main Board (3/4) - ..................... 41
6-11. Schematic Diagram - Main Board (4/4) - ..................... 43
7.
8.
........... 14
....................... 17
................................................ 58
............................... 61
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270 ˚C dur-
ing repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
Notes on chip component replacement
• Never reuse a disconnected chip component.
• Notice that the minus side of a tantalum capacitor may be dam-
aged by heat.
- 2 -