Display Section - Pioneer CMX-5000 Service Manual

÷ Variable range is set to ±10% when power to the unit is first
turned on.
Master tempo button (MASTER TEMPO) and indicator:
Pressing this button causes the master tempo feature to be
powered on or off each time it is pressed.
Tempo control slide:
Moving this dial in the positive (+) direction away from the center
position (normal playback tempo) causes the tempo to become
faster, and moving it in the negative (–) direction causes the
tempo to become slower.
5 Track search button (TRACK SEARCH 4, ¢)
6 Search button (SEARCH 1, ¡)
7 Cue button (CUE) and indicator
Cueing point settings
Cueing point sampler
Back cueing
Cueing point adjust
8 Play/Pause button (PLAY 3/PAUSE 8) and indicator
9 Display
0 Jog dial (+ FWD/– REV)
- Auto mix play button (AUTO MIX PLAY) and indicator
Pressing this button causes auto mixing to be turned on or off
each time it is pressed.
= Play mode select button (PLAY MODE SELECT)
This button is used to select the auto mixing play mode and to
specify program settings.
~ Player select button (PLAYER SELECT) and indicator
This button is used to select discs when using auto mixing.
! BPM indicator
@ NEXT indicator
# BPM/NEXT button
$ Instant change button (INSTANT CHANGE) and indi-
cator
% Short time change button (SHORT TIME) and indicator
Pressing this button causes short time changing to be turned on
or off each time it is pressed.
^ BPM/TRACK display (BPM/TRACK)
This display is used to display the track number and BPM when
using auto mixing or preprogrammed program settings.
& BPM/TRACK dial (BPM/TRACK, PUSH ENTER)
This dial is used to switch between different BPM values when
using BPM synchro playback and to select and confirm track
numbers when playing in program mode.
* Press down on the dial after making a selection to confirm your
choice. (Note that this does not include the switching of BPM
settings.)
* BPM synchro button (BPM SYNC)
When BPM SYNC is turned on (i.e., when the BPM SYNC button
is lit), the tempo will be automatically changed so that the number
of beats per minute matches between tracks mixing into each
other. Pressing this button causes the BPM synchro count feature
to be turned on or off each time it is pressed.
( Mix time control dial (MIX TIME)
This dial is used to specify the mixing time when using the mix
button to perform cross fade mixing.
) Mix mode selection button (MIX MODE SELECT) and
indicator
This button is used to select cut-in, zip, echo or cross fade mixing
as the type of mixing to be used when segueing between tracks.
CMX-5000, CU-V160

Display Section

1
TRACK
3
M
REMAIN
4
A.CUE
5
6
1 2 3 4 5
8 9 10 11 12
3
15 16 17 18 19 20
LOOP
9
1 Track number display
Displays the track number of the track currently being played.
2 Playback speed display
Tempo control range display (±6, ±10, ±16)
Displays the variable range mode specified using the tempo
control slide.
Tempo change rate display
Displays the rate of change of the tempo as specified using the
tempo control slide.
3 Auto mixing playback player display
The display on the side of the player currently in operation will
flash.
4 Auto cueing indicator (A. CUE)
Lights up when auto cueing is turned on.
5 Playback position display
Used to display a full-scale bar graph for the track being played to
make it possible to get an intuitive feel of the elapsed and
remaining play time.
÷ Display as it appears when displaying elapsed time:
All indicators unlit and then indicators light up in sequence
from left
÷ Display as it appears when displaying remaining time:
All indicators lit and then indicators are turned off in sequence
from left
÷ Display as it appears when there are less than 30 seconds
remaining in a track: Slow flashing
÷ Display as it appears when there are less than 15 seconds
remaining in a track: Rapid flashing
6 Track number calendar display
The number corresponding to the track currently being played is
lit. The right-facing arrow is lit for tracks with a track number of 21
or higher.
Programmed track numbers are lit, and the light for each number
for tracks which have already been played are turned off once the
tracks are played.
7 Time display
Used to display the elapsed playback time (when the remain
indicator is unlit) or the remaining playback time (when the remain
indicator is lit) of the current track in minutes (M), seconds (S),
and frames (F). Note that the amount of time remaining is
displayed by default when the power is first turned on.
8 BPM display
Used to display the number of BPM for the current track. Note that
depending on the track there may be times when the BPM
counter is unable to count the number of BPM.
9 Looping indicator (LOOP)
Lights up when playing back in loop mode.
0 Relooping indicator (RELOOP)
Lights up when recording a loop.
2
TEMPO
16 3
10
6
S F
7
8
BPM
6 7
13 14
3
RELOOP
0
81