Epson Runsense SF-110 User Manual page 12

Precautions when performing wireless communication
This product operates on the 2.4 GHz band.
This product operates in the same frequency bandwidth as industrial, scientific, and medical devices such as
microwave ovens and mobile object identification (RF-ID) systems (licensed premises radio stations, amateur, and
unlicensed specified low-power radio stations (hereafter "other radio stations")) used in factory production lines.
1. Before using this product, make sure there are no "other radio stations" being used in the vicinity.
2. If this product causes RF interference between the product and "other radio stations," promptly move to a
different location, stop using the product, and contact your local reseller to ask for advice on preventing interference
(for example setting up partitions).
3. In addition, when harmful radio wave interference occurs between the product and "other radio stations," and
refer to "Where to get help" to contact our service center.
See "Where to get help" on page 96.
If you notice any abnormalities on your skin and so on, stop using the product immediately.
In areas in which usage is restricted, such as on airplanes and in hospitals, follow the rules and regulations
provided (such as in-flight announcements).
Do not bring the product into an operating room, intensive care unit, and so on, and do not use the product
near medical equipment. Radio waves from the product may interfere with electronic medical equipment
causing the equipment to malfunction.
Radio waves from the product may interfere with surgically implanted medical devices such as a cardiac
pacemaker. If you have a surgically implanted medical device such as a cardiac pacemaker, make sure you
follow the instructions and warnings supplied with your medical device.
Using your SF-110 safely
Warning
Caution
12