Cisco ASR 9000 Series System Configuration Manual page 162

Verification
Default Profile:
SDRs:
Active Packages:
RP/0/RSP0/CPU0:ASR9006#show install committed summary
Default Profile:
SDRs:
Committed Packages:
2 Verify the data plane.
show nv edge data forwarding location all
<Snippet>
-----------------node0_RSP0_CPU0------------------
nV Edge Data interfaces in forwarding state: 4
TenGigE0_0_1_3
TenGigE0_1_1_3
TenGigE0_2_1_3
TenGigE0_3_1_3
<Snippet>
In this output, the IRLs must show in the forwarding state.
3 Verify the control plane.
show nv edge control control-link-protocols location 0/RSP0/CPU0
<Snippet>
Port enable administrative configuration setting: Enabled
Port enable operational state: Enabled
Current bidirectional state: Bidirectional
Current operational state: Advertisement - Single neighbor detected
Priority lPort
======== =====
0
1
2
3
</Snippet>
From this output, the 'Current bidirectional state' must show as Bidirectional and only one of the ports
must be in the Forwarding state.
4 Verify the cluster status.
RP/0/RSP0/CPU0:ASR9006#admin show dsc
---------------------------------------------------------
---------------------------------------------------------
This command displays both the DSC (inter rack) status and the redundancy role (intra rack) for all Route
Switch Processors (RSPs) in the system. In this example:
Cisco ASR 9000 Series Aggregation Services Router nV System Configuration Guide, Release 5.3.x
152
Owner
disk0:asr9k-fpd-px-5.1.0
disk0:asr9k-mgbl-px-5.1.0
disk0:asr9k-mpls-px-5.1.0
disk0:asr9k-mini-px-5.1.0
disk0:asr9k-bng-px-5.1.0
disk0:asr9k-px-5.1.0-CSCxxXXXXX-1.0.0
Owner
disk0:asr9k-fpd-px-5.1.0
disk0:asr9k-mgbl-px-5.1.0
disk0:asr9k-mpls-px-5.1.0
disk0:asr9k-mini-px-5.1.0
disk0:asr9k-bng-px-5.1.0
disk0:asr9k-px-5.1.0-CSCxxXXXXX-1.0.0
0/RSP0/CPU0/0
0/RSP0/CPU0/1
0/RSP1/CPU0/0
0/RSP1/CPU0/1
Node ( Seq)
0/RSP0/CPU0 ( 0)
0/RSP1/CPU0 (10610954)
1/RSP0/CPU0 ( 453339)
1/RSP1/CPU0 (10610865)
• RSP0 on rack 0 is the primary-DSC and the active RSP for the rack.
Configuring the nV Edge System on the Cisco ASR 9000 Series Router
<--> TenGigE1_0_0_3
<--> TenGigE1_1_0_3
<--> TenGigE1_2_0_3
<--> TenGigE1_3_0_3
Remote_lPort UDLD STP
============ ==== ========
1/RSP0/CPU0/0 UP Forwarding
1/RSP1/CPU0/1 UP Blocking
1/RSP1/CPU0/0 UP On Partner RSP
1/RSP0/CPU0/1 UP On Partner RSP
Role Serial State
ACTIVE FOX1613G35U PRIMARY-DSC
STANDBY FOX1613G35U NON-DSC
STANDBY FOX1611GQ5H NON-DSC
ACTIVE FOX1611GQ5H BACKUP-DSC