Advertisement
ADDITIONAL SAFETY RULES
FOR CHARGER AND TOOL
1.
The Charger and the
tool
are specifically designed
to
work together.
Do not
attempt t o charge any other cordless tool with this Charger.
Do
not attempt
t o charge the tool with any other charger.
2. Do
not charge the tool when temperature is BELOW
10°C (50OF)
or ABOVE
45OC (113OF).
3. Do
not use charger
in
damp or wet locations.
4.
Do
not attempt t o use a step-up transformer, an engine generator or
DC
5.
Do
not store the tool in locations where the temperature may reach or exceed
6. Do
not incinerate the tool even if
it
is severely damaged or is completely
7.
Be aware that this tool is always in an operating condition, because
it
does
8. Always be sure you have a firm footing.
9.
Hold the tool firmly.
power receptacle.
5OoC (122OF).
worn out. The tool can explode in a fire.
not have t o be plugged into an electrical outlet.
Be sure no one is below when using the tool in high locations.
I O .
Keep hands away from rotating parts.
1 1.
When drilling into walls, floors or wherever "live" electrical wires may be
encountered,
DO
NOT
TOUCH
ANY METAL PARTS
OF
THE TOOL!
Hold the tool only by the plastic handle or plastic tool body t o prevent electric
shock if you drill into a "live" wire.
12. Do
not leave the tool running. Operate the tool only when hand-held.
13. Do
not touch the drill bit or the workpiece immediately after operation; they
may be extremely hot and could burn your skin.
5
Advertisement
