Installation Of Antenna And Down-Converter; Using The Mounting Bracket; Mounting To A Tripod - Sony WLL-RX50 Operation Manual

Installation of Antenna
and Down-Converter
Caution
Be sure to connect the down-converter securely to the
antenna, or the down-converter may fall down.
Be sure NOT to directly connect the down-converter to a
large antenna. If you do so, the connector may be
damaged.

Using the mounting bracket

Normally, directly attach the antenna to the down-
converter, and fix them to a pole using the supplied
mounting bracket.
1
Attach the antenna to the down-converter.
Down-converter
2
Fix the down-converter to the bracket using the
supplied four M4
When required, secure the cable using the supplied
fasten belt.
M4
Cable
Fasten belt
10

Installation of Antenna and Down-Converter

Antenna
Holes for mounting
N connectors
Holes for mounting
× ×
6 and two M3 6 screws.
M3
Bracket
3
Fix the bracket to a pole (20 to 36 mm dia. ).

Mounting to a tripod

You can install the antenna and down-converter by
mounting them to a tripod using the tripod screw hole of
the down-converter.
Note
Attach the anntena in the direction so that the UP arrows
on the rear point upwards.
Pole