Table of Contents
Advertisement
[!] Off
You can prepare the camera for shooting without the flash.
•
If a flashing [
] icon is displayed when you press the shutter button
halfway in low-light conditions, mount the camera on a tripod or take
other measures to keep it still.
Shooting with the FE Lock
Just as with the AE lock
(=
55), you can lock the exposure for the flash
shots.
1
Set the flash to [h]
2
Lock the flash exposure.
z
X
z
3
•
FE: Flash Exposure
Downloaded From camera-usermanual.com Canon Manuals
Still Images
(=
62).
z
Aim the camera at the subject to shoot
with the exposure locked. With the
shutter button pressed halfway, press the
<r> button.
X
The flash fires, and when [(] is
displayed, the flash output level is
retained.
z
To unlock FE, release the shutter button
and press the <r> button again. In this
case, [(] is no longer displayed.
Compose the shot and shoot.
Using Eco Mode
This function allows you to conserve battery power in Shooting mode. When
the camera is not in use, the screen quickly darkens to reduce battery
consumption.
1
Configure the setting.
z
z
Press the <q> button, and then press the
<q><r> buttons to choose [
X
X
[
screen
X
X
The screen darkens when the camera
is not used for approximately two
seconds; approximately ten seconds
after darkening, the screen turns off.
The camera turns off after approximately
three minutes of inactivity.
2
Shoot.
z
z
To activate the screen and prepare for
shooting when the screen is off but the
lens is still out, press the shutter button
halfway.
z
z
To restore the original setting, choose
[
].
] is now shown on the shooting
(=
109).
] in step 1.
Cover
Preliminary Notes
and Legal Information
Contents: Basic
Operations
Basic Guide
Advanced Guide
1
Camera Basics
2
Smart Auto
Mode
3
Other Shooting
Modes
4
P Mode
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
63
- Quick Links:
- Contents: Basic Operations
Hide quick links:
Advertisement
Table of Contents
