Makita 9902 Instruction Manual page 5

FUNCTIONAL DESCRIPTION
Switch action
CAUTION:
*Before plugging in the tool, always check to see that the switch trigger actuates properly
*The tool should not be in contact with the workpiece surface when you turn the tool on
and returns to the
"OFF"
position when released.
or off. Otherwise a poor sanding finish or damage of the belt may result.
To start the tool, simply pull the trigger.
Release the
trigger
to
stop.
For
continuous
operation, pull the trigger and then push in
the lock button. To stop the tool from the
locked position, pull the trigger fully, then
release
it.
Speed adjusting dial
For 9903,9920 and 9404
The belt speed can be infinitely adjusted be-
tween 210 m (690 ft.) and 440 m (1,440 ft.)
per minute by turning the speed adjusting
dial to a given number setting from 1 to 5 .
Higher speed is obtained when the dial is
turned in the direction of number 5; lower
speed is obtained when it is turned in the
direction of number 1.
Select the proper speed for the workpiece
to be sanded.
Lock
button
I
Switch trigger
L
Speed adjusting dial
CAUTION:
The speed adjusting dial can be turned only as far as 5 and back to 1. Do not force it past 5
or
1, or the speed adjusting function may not longer work.
5