Table of Contents
Advertisement
SNP-3300 30X PTZ Network Camera
On/Off : The application of limitation will be determined. Default
setting is Off.
6.4.3. Area Setting
Areas can be indicated. Areas can be designated up to 8.
Area Name : Area name can be set up. A maximum of 12 letters
(English, Chinese, numbers) can be entered. When you finish
inputting the name, adjust the position mark to "SET".
Area Position : Area range can be designed. If the area range is
overlapped, the smaller area number will indicate the overlapping
part.
On/Off : It can be determined whether or not to activate the area
mark. The activation becomes effective as soon as the position
moves from the current area to other areas. Set up the OSD
Setting as ON. If it is in OFF mode, this function does not work.
Default setting is OFF.
116
Advertisement
Table of Contents
