Technical Specifications - Maytag MFR18 Installation Instructions Manual

Technical Specifications
| uFma (17kg) | UFR25(10kg) | UFR30 (13kg) ] UFR40 (la kg)
Dimensions and Weights
Washer dimensions 26.00x28.00x41.10" 26.00x34.00x44.90" 29.50x32.30x48.20" 33.70x35.20x51.80"
(width x depth x height) (660x710x1045 mm) (660x865x1140 mm) (750x820x1225 mm) (855x895x1315 mm)
Net weight 309 lb. (140 kg.) 408 lb. (185 kg.) 430 lb. (195 kg.) 618 lb. (280 kg.)
Package dimensions 27.60x28.70x46.50" (box) 27.60x38.98x51.38"(box) 31.90x38.19x54.92" (box) 36.80x37.60x60.24" (box)
(700x730x1180 mm) (700x990x1305 mm) (810x970x1395 mm) (935x955x1530 mm)
Gross weight 320 lb. (145 kg.) 430 lb. (195 kg.) 452 lb. (205 kg.) 640 lb. (290 kg.)
Transportation volume 21.20 cu.ft. (0.6 m3) 31.80 cu.ft. (0.9 m3) 38.85 cu.ft. (1.1 m3) 48.40 cu.ft. (1.37 m3)
Electrical Requirements
Supply voltage (50/60 Hz) 120V 1-phase* 208-240V 1-phase
208-240V 3-phase
Supply deviations +10%, with max 1% of the frequency +10%, with max 1% of the frequency
Fuse/Breaker Type Slow (curve D)
GFCI** Class B
Nominal motor output 600 W 600 W 0.75 kW 1.50 kW
Current (steady speed) 5A 9A 4.5A 5A
Supply protection device 10A 10A 15A 15A
Drum RPM
Wash 48 RPM 1 48 RPM 1 45 RPM 44 RPM
Spin maximum 580 RMP 1 580 RPM ] 525 RPM 505 RPM
G-factor maximum 100
Water Supply Requirements
Average water usage 17 gal (65 I) 124 gal (90 I) 1 30 gal (115 I) 43 gal (160 I)
Average hot water usage 4 gal (15 I) 1 6 gal (23 I) J 8 gal (30 I) 11 gal (42 I)
Allowable water pressure 14.5-116 psi (100-800 KPa)
Recommended pressure 43-73 psi (300-500 KPa)
Water inlet BSP 3/4"
Maximum water temperature 194°F (90°C)
Drain System
Type Gravity Feed
Drain diameter 3" (76 mm)
Flow rate 38.3 GPM (145 I/min.)
Liquid Soap
Liquid soap signals 8 for PN Models/3 for PD Models (see electrical schematic)
Soap dispenser 3 compartments: prewash, wash, and last rinse
Environmental Requirements
Operating temperature 33.8 to 95 °F (1 to 35°C)
Relative humidity 10 to 95 % without condensation
Elevation above sea level Up to 3280 ft. (1,000 m)
Storage temperature -13 to 131°F (-25 to 55°C)
Floor Requirements
Maximum static load 370 lb. (1.7 kN) 474 lb. (12.1 kN) 577 lb. (2.6 kN) 675 lb. (3.1 kN)
Maximum dynamic load 801 lb. (3.6 kN) 1020 lb. (4.5 kN) 1450 lb. (6.5 kN) 1994 lb. (8.9 kN)
Dynamic frequency 9.67 Hz 9.67 Hz 8.75 Hz 8.42 Hz
Noise
Noise output 1 66 dB(A) 1 66 dB(A) J 66 dB(A) 166 dB(A)
* 2 phases of a 3-phase power supply may be used. See "Electrical Requirements".
** Consult an electrician to ensure proper GFCI connection. 18