Test Mode - Samsung SW70X1 Service Manual

7. Troubleshooting

7-2 Test Mode

7-2-1 Test Mode : WATER LEVEL + POWER
1. Entering : Press the power key while pressing down the WATER LEVEL button.
2. Ò Ò is displayed on the display.
3. If you press the COURSE key, the test mode changes step by step.
→ 01 → 02 → 03 → 04 → 05 → 06
4. The test is conducted if you press the START/HOLD key when the test mode is in a display state.
5. Each mode description
MODE NO
1
2
3
4
* Mode are only for manufacturing process.
,
7-2
DISPLAY
Aging test in driving part and then, driving part and
display are turned ON/OFF for 1 second.
Repeating 5 min. dehydration and 3 min. stop without draining.
It read Lid open and unbalance and shows them.
It shows this on the indicator.
Operate the washing cycle after suppling water
to high level.
Indicate the input value of weight sensing pulse
with hexa value.
TEST DESCRIPTION REMARKS
WASHING MACHINE