Setting The Security Lock; Setting The Sw Out Terminal Output - Sanyo SRT-612DC Instruction Manual

SETTING THE SECURITY LOCK

The security lock function is designed to prevent
accidental stopping of recording if the STOP button is
pressed inadvertenly.
1
While holding the TRACKING/V.STILL + button,
press the REC/PLAY SPEED button.
"ö" is displayed on the digital display.
°
To cancel the security lock, while holding the
TRACKING/V.STILL + button, press the REC/PLAY
SPEED button, "ö" will be erased from the digital
display.

SETTING THE SW OUT TERMINAL OUTPUT

While recording, different outputs can be selected for the
SW OUT terminal.
1
Press the MENU button to display the MENU 2 (SW
OUT).
MENU 2 (Initial screen)
<SW OUT>
FIELD
TIMING
8H
<USED TIME>
VIDEO
POWER
2
Press the l (or j) button to set the "FIELD" (or
"FRAME").
With each press of the button, the setting will
°
change as indicated below.
01 02 03
NOTE:
•
If "TIMING" is set to FRAME (see step 4),
"FRAME" will be indicated instead of "FIELD".
3
Press the ] button.
The "TIMING" setting starts flashing.
°
01
FIELD
Y
00000H
00000H
04 05 10 30 60
NOTES:
•
While the security lock is engaged all commands,
except the one to cancel the security lock, are disabled.
•
The security lock cannot be engaged while a menu is
displayed.
4
Press the l (or j) button to set the "TIMING".
FIELD . . . 1 pulse is output after each set number of
fields.
FRAME. . 1 pulse is output after each set number of
frames.
5
Press the ] button.
The "8H" setting starts flashing.
°
6
Press the l (or j) button to set the "8H".
Y . . . . . . . When recording in 8-hour mode, a pluse
signal is output.
N. . . . . . . When recording in 8-hour mode, a pulse
signal is not output.
7
Press the PAUSE/SCAN button, the normal screen is
displayed.
The setting procedure is now completed.
°
22
MENU 2