Honeywell Dolphin 99EXLG Series Quick Start Manual page 23

8. Lift the door up to expose the
socket.
9. Slide the microSD or
microSDHC card into the door
of the socket.
Note: Make sure the interface on the
memory card is connected to the
interface in the socket; align the
notch on the card with the notch
of the socket.
10. Close and lock the access
door.
11. Close the protective door over
the memory socket. Insert and
tighten the T6 TORX screw to
secure the door closed.
12. Install the battery and the
battery door. Reattach the
hand strap to the terminal.
13. Press the Power key or the
SCAN key to wake the
terminal.
Step 8
Step 9
Step 10
21