Inbound Filter - D-Link DSL-2520U User Manual

Section 3 - Configuration

INBOUND FILTER

By default, all incoming IP traffic from the internet network is allowed. The Inbound Filter allows you to create a filter rule to filter incoming IP traffic
by specifying a filter name and at least one condition below. All of the specified conditions in this filter rule must be satisfied for the rule to take
effect.
ADD OUTBOUND IP FILTER
Type the filter name on the Filter Name.
Choose TCP, UDP or ICMP on the Protocol.
Type Source IP address, Source Subnet Mask and Source Port
Type Destination IP address, Destination Subnet Mask and
Destination Port
Please click Add/Apply button to add the policy in the list.
D-Link DSL-2520U User Manual 35