Keep your hair, clothing Damaged or entangled cords increase the and gloves away from moving parts. risk of electric shock. Loose clothes, jewellery or long hair can be caught in moving parts. Bosch Power Tools 1 609 929 R16 | (14.2.08)
Use of the power tool for mounting hardware of the power tool will run operations different from those intended out of balance, vibrate excessively and may could result in a hazardous situation. cause loss of control. 1 609 929 R16 | (14.2.08) Bosch Power Tools...
If you lose control of the power tool, proper precautions as given below. the cord may be cut or snagged and your hand or arm may be pulled into the spinning accessory. Bosch Power Tools 1 609 929 R16 | (14.2.08)
Do not restart the cutting operation in the workpiece. Let the wheel reach full speed and carefully reenter the cut. The wheel may bind, walk up or kickback if the power tool is restarted in the workpiece. 1 609 929 R16 | (14.2.08) Bosch Power Tools...
Additional safety warnings Read all safety warnings and all in- Wear safety goggles. structions. Failure to follow the warnings and instructions may re- sult in electric shock, fire and/or se- rious injury. Bosch Power Tools 1 609 929 R16 | (14.2.08)
* the hands warm, organisation of work patterns. 17 Diamond cutting disc* *The accessories illustrated or described are not in- cluded as standard delivery. 1 609 929 R16 | (14.2.08) Bosch Power Tools...
Adjust the protection guard 6 in such a man- ner that sparking is prevented in the direc- tion of the operator. 28.01.2008, Robert Bosch GmbH, Power Tools Division The protection guard 6 may be turned only D-70745 Leinfelden-Echterdingen upon actuation of the release lever 1! Oth-...
Page 11
Tighten the cup Clean the grinder spindle 5 and all parts to be brush/disc brush with an open-end spanner. mounted. 1 609 929 R16 | (14.2.08) Bosch Power Tools...
Grinding and cutting discs become very hot class respirator. while working; do not touch until they have cooled. Observe the relevant regulations in your country for the materials to be worked. Bosch Power Tools 1 609 929 R16 | (14.2.08)
Page 13
In this manner, the workpiece will not become too hot, does not discolour and no The vacuum cleaner must be approved for the grooves are formed. extraction of masonry dust. Bosch provides suit- able vacuum cleaners. Flap Disc Switch on the ma-...
Fax: +44 (0844) 736 0146 should be carried out by an after-sales service E-Mail: SPT-Technical.de@de.bosch.com centre for Bosch power tools. In all correspondence and spare parts order, Ireland please always include the 10-digit article Origo Ltd.
Page 15
Electronic Equipment and its implementation into national right, power tools that are no longer usable must be collected separately and disposed of in an environmentally correct manner. Subject to change without notice. 1 609 929 R16 | (14.2.08) Bosch Power Tools...