Connecting Audio Cables; Connecting An Av Receiver Or Amplifier Using An Coaxial Digital Audio Cable; Connecting An Av Receiver Or Amplifier Using An Optical Digital Audio Cable (Bdp-88Fd Only); Connecting The Pre-Main Amplifier Using A Balanced - Pioneer BDP-88FD Operating Instructions Manual

3d
Hide thumbs Also See for BDP-88FD:
Table of Contents

Advertisement

Available languages

Available languages

Connecting audio
cables
Connecting an AV receiver or
amplifier using an coaxial
digital audio cable
BDP-85FD's rear panel
ANALOG AUDIO OUT
R
L
UT
Red
White
2-channel
analog audio
can also be
connected.
Direction of
signal flow
To audio input
terminals
Note
• The volume of analog output audio may be low
depending on the setting of this device and contents
being played.
Connecting an AV receiver or
amplifier using an optical
digital audio cable (BDP-
88FD only)
BDP-88FD's rear panel
NORMAL INVERSION
ANALOG AUDIO OUT
R
L
UT
Red
White
2-channel
analog audio
can also be
connected.
Direction of
signal flow
To audio input
terminals
ZERO
RS-
SIGNAL
HDMI OUT
DIGITAL OUT
LAN
(10/100)
SUB
MAIN
COAXIAL
Coaxial digital
audio cable
(commercially
available)
To coaxial
digital audio
input terminal
AV receiver or amplifier
ZERO SIGNAL
RS-2
HDMI OUT
DIGITAL AUDIO OUT
LAN
(10/100)
SUB
MAIN
OPTICAL
COAXIAL
Optical digital
audio cable
(commercially
available)
To optical
digital audio
input terminal
AV receiver or amplifier
Connecting the Pre-main
amplifier using a balanced

cable (BDP-88FD only)

BDP-88FD's rear panel
NORMAL INVERSION
ANALOG AUDIO OUT
R
L
UT
Balanced cable
(commercially
available)
To balanced-type
input terminals
Audio cable
(commercially available)
To audio (RCA)
input terminals
Direction of
signal flow
Note
• The volume of analog output audio may be low
depending on the setting of this device and contents
being played.
 Balanced output connector
(appearance on unit side; equivalent
to XLR-3-31)
The settings of the balance output terminal can be
changed. Refer to the XLR Terminal Polarity on page 43 for
details.
ZERO SIGNAL
RS-2
HDMI OUT
DIGITAL AUDIO OUT
LAN
(10/100)
SUB
MAIN
OPTICAL
COAXIAL
Pre-main amplifier,
etc., furnished with
balanced-type input
connectors
Pre-main amplifier
with RCA (pin plug)
input connectors
NORMAL INVERSION
02
21
En

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bdp-85fd

Table of Contents