Installing The Backup Battery - Canon Elura 60 Instruction Manual

Installing the Backup Battery
The backup battery allows the camcorder to retain date, time (OJ 21) and other
camcorder settings while the power source is disconnected. Connect a power source to
the camcorder when replacing the backup battery to retain the settings.
-
1. Press the OPEN button to open the
LCD panel.
2. Pull out the battery holder.
3. Place the lithium battery with the
+ side facing downward into the
battery holder.
4. Insert the battery holder.
5. Close the LCD panel.
WARNING!
• The battery used in this device may present a fire or chemical burn hazard if
mistreated. Do not recharge, disassemble, heat above 212 of (100°C) or
incinerate the battery.
• Replace the battery with a CR1616 made by Panasonic, Hitachi Maxell, Sony,
Toshiba, Varta or Renata. Use of other batteries may present a risk of fire or
explosion.
o
Do not pick up the battery using tweezers or other metal tools as this will
cause a short circuit.
o
Wipe the battery with a clean dry cloth to ensure proper contact.
o
Keep the battery out of reach of children. If it is swallowed, seek medical
assistance immediately. The battery case may break and the battery fluids may
damage stomach and intestines.
o
Do not disassemble, heat or immerse the battery in water to avoid the risk of
explosion.
fI The backup battery has a life span of about a year.
~
flashes in red to inform
~
you that it needs to be replaced.
17