Table of Contents
Advertisement
Drill Chuck Arbor
To install the drill chuck:
1.
2.
3.
Note: While it may not seem like there is
anything keeping the drill chuck in place, the
Jacob's Taper fit provides a strong bond and
will hold the drill chuck tightly Figure 14
Figure 14.
Face Mill
All types of milling cutters and drill bits are
sharp. It is recommended that these not
be handled directly. Use leather gloves or
shop towels to hold sharp tooling to avoid
cuts to your hands. Be careful while han-
dling them and store them in a child safe
location.
To install the face mill:
1.
2.
Figure 15.
3.
4.
Collet/Arbor
Figure 15
Page 20.
Advertisement
Table of Contents
