Advertisement
For using Touch Panel
1. Turn off the monitor.
2. Install the equipment.*
- Using slot 2 type PC:
Connect the slot 2 type PC into the option board slot. Connect the B
type connector to the USB upstream port on the left
back side of the monitor and the A type connector to the downstream
port on the slot 2 type PC.
NOTE: Please refer to the slot 2 type PC's manual for connection.
NOTE: When you set option board accessory other then slot 2 type
PC, touch function may not work.
- Using external computer:
Connect the B type connector to the USB upstream port on the left
back side of the monitor and the A type connector to the downstream
port on the external computer (Figure 1).
3.
Turn on the monitor.
*
: Please contact your NEC customer support for more detailed information.
1
1
Figure 1
User's Manual
Advertisement
