Connecting To A Remote Control Unit - Sony DXC-390P Instructions For Use Manual

Connecting to a Remote Control Unit

You can connect the RM-C950 remote control unit.
DXC-390P
VIDEO OUT
DC IN/VBS
TRIG IN
LENS
MENU LOCK
OFF ON
RGB/SYNC
REMOTE
REMOTE
DC IN/VBS
Operating the Camera with the RM-C950 Remote Control Unit
When the RM-C950 remote control unit is used with this camera, the names
and functions of the PRINT, FLASH, LONG EXPOSURE and FUNCTION
buttons and the GAIN control change as follows, in accordance with the
functions of the camera.
* CMA-D2CE is intended for general purpose use. It is not intended for medical use.
75-ohm coaxial cable
Composite video input
VIDEO OUT
RM-C950 remote control unit
CAMERA
Camera cable
(supplied with RM-C950)
CCDC cable: CAMERA (4-pin)
CCXC cable: CAMERA (12-pin)
CCDC-5/10/25/50A/100A cable
or
CCXC-12P02N/05N/10N/25N cable
Video monitor,
VCR, etc.
Set the MODE
1
CMA-D2CE*/
selector to the
D2MDCE
2 "1" position.
camera adaptor
Equipotential
ground terminal
(only for CMA-
D2MDCE)
Basic System Connection
Power cord
41