USB Configuration for Windows 2000
1. With the Router connected to your PC's USB port, start up your PC in
Windows 2000 and insert your driver diskette. Windows will show a mes-
sage notifying you that the PC has found new hardware. Windows' Hardware
Wizard will show a message to say that it is ready to start installing the driv-
er files to your PC. Click the Next button.
2. Select "Search for a suitable driver for my device (Recommended)" and
click the Next button.
25
Instant Broadband Series
EtherFast Cable/DSL Routers
3. When Windows asks you where to search for driver files, select "Floppy
disk drives" and click the Next button.
4. Windows will show a message saying that it has found the driver files.
Click the Next button.
26