Configuring Windows 2000 Pcs - Linksys BEPSR11 User Manual

Configuring Windows 2000 PCs

1. Go to the Network screen by clicking the Start button. Click Settings and
then Control Panel. From there, double-click the Network and Dial-up
Connections icon.
2. Select the Local Area Connection icon for the applicable Ethernet adapter
(usually it is the first Local Area Connection listed). Do not choose a
TCP/IP entry whose name mentions DUN, PPPoE, VPN, or AOL. Double-
click the Local Area Connection.
3. The Local Area Connection Status screen will appear, as shown in Figure 7-
3. Click the Properties button.
38
Instant Broadband
Figure 7-3
Series
™ EtherFast
4. Select Internet Protocol (TCP/IP), as shown in Figure 7-4, and click the
Properties button.
5. Select Obtain an IP address automatically, as shown in Figure 7-5. Once
the new window appears, click the OK button. Click the OK button again
to complete the PC configuration.
6. Restart your computer.
®
Cable/DSL Routers
Figure 7-4
Figure 7-5
Go to "Chapter 8: Configure the Router."
39