Intended use Remove keys and adjusting wrenches Your Black & Decker drill has been designed for drilling in Always check that keys and adjusting wrenches are removed wood, metal, plastics and masonry as well as for screwdriving from the tool before operating the tool. purposes.
Page 4
Additional safety instructions for Australia and Removing and refitting the chuck (fig. E) New Zealand Open the chuck as far as possible. This appliance is not intended for use by young or infirm Remove the chuck retaining screw by turning it clockwise persons without supervision.
Alternatively, a list of authorised at: www.2helpU.com. Black & Decker repair agents and full details of our after-sales service and contacts are available on the Internet at: Technical data www.2helpU.com. KR550 KR600 KR650 KR700 Power input W 550 No-load speed...